Warning: ob_start(): non-static method anchor_utils::ob_filter() should not be called statically in /home4/flguy2/public_html/kelleyconcrete.com/wp-content/plugins/sem-external-links/anchor-utils/anchor-utils.php on line 33
Get Adobe Flash player
Calendar
November 2017
M T W T F S S
« Dec    
 12345
6789101112
13141516171819
20212223242526
27282930  

Drilling Through Rebar

drilling through rebar
The best way to anchor a wood fence for wind?

I think to be diagonal from the 2×4 high stakes the ground to avoid the wind to push my poise to pass close by the hurricanes, my floor is sandy. Hence the reason for closing exploded about 2 'of vertical few years ago. I was thinking about drilling a hole in the side of a masonry block and 2×4 and put a piece of rebar through the holes to secure the horizontal diagonal on the ground, then covered with sand to act as an anchor. A better idea and not use cement? The fence is 6 'by 8' wide board in the panel edge. This is the "long 4×4 is 3 '10 on the floor with cement and bottom panels is about 1 'from the ground.

You do not say what kind fence. Is it possible to remove one or a few strips of the joints to allow the wind to pass through the fence, instead of trying to block the wind at all?

Drilling Re-bar for Sentry Safety Mesh Pool Fence


Bosch RC2124 3/4-Inch by 12-Inch SDS Plus Rebar Cutter


Bosch RC2124 3/4-Inch by 12-Inch SDS Plus Rebar Cutter


$20.00


Value not found…

BOSTITCH SL50351G 1-by-5/16-Inch 18-Gauge Staples, 5000-Per Box


BOSTITCH SL50351G 1-by-5/16-Inch 18-Gauge Staples, 5000-Per Box


$14.99


5,000 count, box stitch, 1″, cap staples, box, to be used in box stitch cap Stapler, sb150slbc-1. This product is easy to use. This product is highly durable. Manufactured in China….

Makita D-00832-25 3/16-by-6-1/4-Inch Standard SDS Bit, 25-Pack


Makita D-00832-25 3/16-by-6-1/4-Inch Standard SDS Bit, 25-Pack


$47.50


Makita D-00832-25 3/16-inch x 6-1/4-inch 25-Pack Carbide Tipped SDS-Plus Bit. Utilizes Makita’s Thruster style carbide tip which penetrates on contact and plows through rebar. The Makita D-00832-25 has a reinenforced ground flute for efficient dust removal. The Makita D-00832-25 is designed for drilling into brick, masonry and concrete. Use with SDS-Plus Hammers….

Comments are closed.